Toposim Forums Forums Support, Development & Feedback Usability PASI elevation problem

This topic contains 1 reply, has 2 voices, and was last updated by  Justin – Toposim 2 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #878

    vgbaron
    Participant

    Hi Justin – Using P3D4 – installed Tongass Fjords scenery into sim. It contains 8 elevation bgl’s. The attached pic shows the water runway at A29 Sitka near PASI. As you can see there is a water wall near the AI Boat. After some trial and error I found if I disabled Toposim North America, the scenery works just fine.

    I know sewveral users who do not use Toposim and are using Tongass without issue in V4.

    Any thoughts on a solution?
    Thanx,
    Vic

    Attachments:
    You must be logged in to view attached files.
    #880

    Hi Vic,

    Alaska V2 will have complete 5m coverage, as well as Orbx compatibility via files covering the various Orbx Alaska product that can be toggled on and off.

    Hoping to complete the work within the next six to eight weeks.

    Meanwhile, not a perfect solution, but the

    TOPOSIM_DEM_NorthAmerica_Alaska_Panhandle_LOD12-13.bgl
    TOPOSIM_DEM_NorthAmerica_Alaska_Southeast_LOD12-13.bgl

    files can be renamed to have a BGX extension.

    Thanks

    Justin

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.